| Page 1 | Page 2 | Page 3 | Page 4 | Page 5 | Page 6 | Page 7 | Page 8 | Page 9 | Page 10 |
|
NOTE: If you are trouble shooting or fine tuning, you may wish to change "Use IPX Header Compression" in
Network, Dial-Up Adapter (Properties, Advanced) to NO and see if there is any improvement by doing the
following.
Click on Dial-up Adapter and click the properties box. 
Click the Advanced tab and then click Use IPX Header Compression, then click the little down arrow to the right of
the box and click NO.
Click OK. |
![[previous]](http://www.hal-pc.org/~jmf/images/previous.gif){kind=small}
![[Support Index]](../images/index.gif){kind=small}